brake servo steady bracket left or right.state
MGF and MGTF Brake Servo Reinforcement Bracket
Item code: BR7680 L /R
(Ex £25.00)
MGF and MGTF Brake Servo Reinforcement Bracket Designed and Manufactured by Mike Satur
Order in the next Hours Mins and Seconds,
To get your item delivered on Monday
PLEASE NOTE BEFORE ORDERING.We have LHD parts in stock and currently re-manufacturing RHD parts as we have sold out. These will be back in stock approx 15 October 2021.The RHD ones have had a price increase..
Brake servo bracket and bulkhead stiffening plate by Mike Satur.

Fits all types of air boxes no 'snorkel' needed..unless you want to go fishing. Probably the cheapest on the market.!! Now with an improved protection powder coated finish.

Comes with bolts,nuts and instructions for fitting.

Please note if you have A/C fitted, access to the inside of the car to fasten the two M8 nuts is difficult so we recommend using an M8 'rivnut' blind fastener from the out side so eliminating the need for interior access.

For this application you will need to have the use of a set of rivnut pliars. These are similar to a pop rivet pliers.

The kit is supplied with two rivnuts with every order as this is an easier way of fitting the kit and avoid having to partially strip out the interior.

Two 11mm diameter holes will need to be drilled and when doing so use a sleeve on the drill so as not to drill any more than necessary through the bulkhead.

Combined postage is available when multiple products are ordered. Over payments will be refunded when orders are processed.

Recent review.

Brake Servo Reinforcement Bracket Review:

I chose this product for a few reasons; 1. A nice piece of engineering, simple but good quality,2. I had an old style snorkel I did not want to change, 3. At £40 it was good value.

Fitting was relatively straight forward taking approximately 2 hours. Drilling two holes is the only intrusive process requiring a drill or hole cutter.

The difference is significant on the pedal travel, reducing it by 0.5 - 0.75 inches. Giving the feel of a firmer pedal and more positive braking.

Definitely a worthwhile modification and a quality piece of kit.


Rgds JT

Customer Reviews (3)
Cheap modification works as sold
Brake servo reinforcement bracket. If you firm the brakes with braided hoses the compliance of the bulkhead becomes evident especially with bigger brakes. Reinforcement then increases sensitivity of feel of brakes. Works well.
2005 mgtf brake servo strengthening bracket
Received bracket today absolutely 2nd to none quality, customer service throughout ordering gave me nothing but confidence. Came complete with all fittings required Cant rate the service and product high enough. Big thanks Mike
Superbly engineered & presented product once again. Fitting instructions were clear & precise. Improvement in the brake pedal was so noticeable. A very worthwhile upgrade. Many thanks once again Mike.