Due to price increases on raw materials and the special M12 high tensile screws the price of this item has increased.
Please read ALL the information.
If you are looking to fit a set of wheels which are non-standard you will find out that there is very little choice of wheels that bolt straight on to the MGF and TF. To overcome this problem Mike Satur  designed these adapters (1997) which now allow wheels with a PCD (pitch circle diameter) from 95.25mm to 114mm to be fitted to the MGF & TF. This caters for virtually any 4 stud wheel with suitable offset of around 40mm to 46mm to fit these adapters.(Thickness of adapters 18mm) Only fit cars with a 95.25pcd to then allow fitting of wheel up to 114 pcd. Note we have supplied these to fit other marques such as Triumph and Morris Ital,Metro which share the same PCD. Check first before ordering.
NOTE the outer spigot is 56.1mm the same as standard MG/Rover wheels and the 17" 4 stud ZS/ZR wheels will bolt directly onto these adapters and they usually have an offset of around 42mm Check first which is suitable.
Because of the design when fitted and depending on design of the wheel being fitted the protruding studs may need trimming flush with the adapter face.

SET OF 4 IN A KIT.
Note these are not intended to space out the stock wheel as the spigot is a bigger diameter.Spacing out a wheel will upset the geometry and potentially affect the handling if the correct offset wheel is not fitted.
Once fitted we cannot accept returns.
Colour may vary from photo as they are anodised for protection.

Combined postage is available when multiple are products are ordered. Over-payments will be refunded when orders are processed.
Additional Scews and nuts are available at £2.18/each (inc vat)  call to order.