Top Arm Pivots Stainless Steel Rebuild kit (Sold as pair)
Item code: TAPSS
£ 81.60
(Ex £68.00)
MGF and MGTF Top Arm Pivot kit Stainless Steel (pair)
Order in the next Hours Mins and Seconds,
To get your item delivered on Wednesday
This will replace the original top arm pivot shaft for both front and rear MGF and front for the MGTF and Metro.These are made from 304 Stainless steel which will eliminate the corrosion usually found on the stock part. Sold as a pair and come complete with all the  parts required to rebuild the top arm. 4 oilite bushes 3/4"long, 4 O ring seals,4 thrust washers in stainless steel,4 x 1/2"UNF nyloc nuts and 2 end plates in stainless steel and the 4 outer seals,1 bearing removal tool also two M6 blanking screws to replace the grease nipple.
Note you will require 2 kits for the front and rear of a MGF and one kit for the front only of the MGTF (See TF rear top arm spacer kit)
Introductory price shown for this new product and represents very good value for this level of quality.
NOTE. All parts manufactured in the UK except the oilite bushes (USA) . Most other replacement kits are manufactured in China some of these are manufactured out of tolerance so be careful what you buy..if it's cheap then they will be a reason for it!
Note: Before fitting any pivot kits try them in the arm with the washers and the tighten up the nuts at each end. The pivot should move freely and not lock up on the arm..if it does send them back from where you bought them from as they are made out of tolerance!!
Are these cost effective?? The OE ones are £98+Vat each, the imported ones are £20 +Vat each and mine work out to £34+vat each and are made from better materials in the UK! Go figure that one out!
 See last photo of stock steel pivot badly worn by the ingress of water and damage by the needle roller bearings compared to a new stainless steel part.

Note these bushes require very little maintenance using a few drops of oil NOT grease.
These pivots ,a set of 4, can be specified with all FCCKits for an additional £50.00 plus vat per kit. The cheaper price is because oilite bushes and seals are fitted to all our FCCKits as standard.
Related Products
front top arm rebuild service
MGTF Front Top Arm Rebuild Service
Exchange service for MGTF top arms and SS pivot
(Ex £180)
mgf coil over gaz or spax shock conversion kit road version
MGF FCCKit Coil over GAZ Shock Conversion Suspension kit MK6 SOLD OUT Use MK8!!
MGF Coil over GAZ shock conversion kit ROAD version. Mike Satur design Hydragas replacement MK6 SOLD OUT USE MK8 VERSION
£1,250.00 £1320.00
(Ex £1041.67)
mgf and mgtf top arm replacement bearings
MGF and MGTF Top Arm Replacement Bearings Kit
MGF and MGTF Top Arm Replacement Bearing Kit with outer seals
(Ex £28.29)
camber kit mgf/tf
MGF and MGTF Stainless Steel Camber Adjuster Kit MK2 by Mike Satur
MGF and MGTF Stainless Steel Camber Adjuster Kit MK2
(Ex £68.33)
View Options
Customer Reviews (0)