MGF and MGTF Small Stainless Steel Subframe Mounts
Code: FSSM
£ 71.95
(Ex £59.96)
MGF and MGTF Small Stainless Steel Subframe Mount
Order in the next Hours Mins and Seconds,
To get your item delivered on Wednesday
Enquire About This Product
This new design by Mike changes the way we use this part. The old design made from 2mm mild steel soon corroded and could cause a MOT failure. The standard replacements were no better and this lead to a stainless steel copy. However the problems associated with this design still remain. ie: they are a weak design and not user friendly when it comes to removing the subframe.
The old design had to be removed from the chassis if removing the subframe.
In an ideal world they need to be retained to the chassis and the subframe detached from them so when the subframe is re-mounted to the body the alignment is still the same, otherwise a geometry check is necessary which means more expense. 
This new design allows the subframe to be detached and the actual mount stays fixed to the chassis in order to maintain the same alignment.
The rear small mounts have 4 fixings per mount and because they old screws seize and snap this kit comes with replacement high tensile riv-nuts enabling a damaged chassis mount to be repaired without any welding and be much more stable in use!

Using CNC machining and laser cutting this new design is more accurate, stronger and easier to use and hopefully cheaper than the stock or copied parts that are dubiously manufactured by welding on each side plate, this invariably distorts and ends up out of parallel by bolting them down they are then put under stress . These parts are dove-tailed locking them together therefore ensuring 100% accuracy every time and then TIG welded  to last indefinitely. They are guaranteed for the life of the car or owner whichever comes first!
The new design small mount is sold as a pair and includes 2x HT M14 bolt and the 4x M8 HT mounting screws for the front subframe and 8 x M8 HT screws and 8 HT riv-nuts for the rear mounts  For a full car set you will need 4 (plus 4 large mounts)
NB:  PLEASE SPECIFY IF YOU WANT THESE FOR THE FRONT SUBFRAME OR REAR SUBFRAME AS THE BOLT LENGTHS ARE DIFFERENT . SELECT THE CORRECT OPTION WHEN ORDERING.